Home Products

Programmers

PRESTO FORTE

Logic analyzers

SIGMA2 OMEGA

USB products

UCAB232 UCAB232i

Other products Museum

Electronic Design Sales & Prices Support About us Contact

Discontinued ASIX products

List of dicontinued ASIX products with recommended replacements (if available).

Note: Some of these products can be manufactured upon customer's request (e.g. some of USB modules - UMP2, UMS3), however, minimum order quantities and lead time of 8 to 10 weeks (typically) apply.

Emulators

DISCONTINUED! MU Alpha BREAKTHRU PRODUCT: Fully featured, extremely low cost emulator for the PIC16F84/84A, PIC12C508A/509A and PIC16C54C/56A/58B (limited to 1 Kword of program memory).

DISCONTINUED! MU Beta BREAKTHRU PRODUCT: Fully featured, very low cost emulator for the most popular mid-range and low-end PIC® MCUs in 6 to 18-pin packages (such as PIC12C5xx, 12F6xx, 16C5x, 16C55x, 16C62x, 16C71x, 16F84A, 16F62x, 16F630/676, 10F2xx)

DISCONTINUED! EMUSB USB interface for MU Beta

DISCONTINUED! XENIA Emulator for Xilinx and Atmel Serial Configuration PROMs for FPGAs and JTAG programmer for Xilinx CPLDs. Memory capacity 32 Mbit, 2.5 / 3.3 / 5V support, very fast download speed, AC/DC as well as rechargeable battery operation.

Programmers

DISCONTINUED! Recommended replacement: PRESTO PICCOLO Extremely low cost development programmer for Microchip PIC® MCUs with Flash memory and 18 pins. Larger devices (with 28 and 40 pins) can be programmed using the built-in ICSP connector and cable.

DISCONTINUED! Recommended replacement: PRESTO PICQUICK Very fast, reliable and cost effective development programmer for all Microchip PIC® MCUs and Microchip serial E2PROMs. It has a built-in In-Circuit Serial Programming (ICSP) connector which allows for programming the devices already assembled on the PCB.

DISCONTINUED! Recommended replacement: PRESTO PICCOLO GRANDE Very low cost development programmer for Microchip PIC® MCUs with Flash memory in 8-pin, 18-pin and 40-pin packages. These devices can be also programmed using the built-in ICSP connector and cable.

DISCONTINUED! Recommended replacement: PRESTO CAPR-PI Very low cost ICSP development programmer for Microchip PIC® MCUs with Flash memory, powered by target application 5 V power supply.

DISCONTINUED! CAPR-EC CAPR-EC is a low cost programmer/debugger for Cyan Technology's eCOG1 16-bit microcontroller with 64 Kbytes of Flash memory, very low power consumption and many other advanced features.

Debugging Tools

DISCONTINUED! Recommended replacement: SIGMA (with software INSIDER) INSIDER Surprisingly useful low cost tool for firmware development support, capable to monitor 4/8/12/16 bit data (such as register contents, current program position, ...) by adding a simple code snippet to your source and using two or three device pins. Its usage is not limited only to MCUs: INSIDER can also be used to debug applications based on programmable gate arrays (FPGA).

Development Boards

DISCONTINUED! PVK40 Feature rich development board for the PIC® Flash MCUs - PIC16Fxx, PIC18Fxx and now also for Atmel AVR. Complete with two potentiometers, photoresistor, microphone, support for three types of serial EEPROMs (I2C - 24xx, MicroWire - 93xx, SPI - 25xx), buzzer, LED display, LED, LED bargraph, LCD display support, 8 pushbuttons, IR transmitter and receiver, RS232 converter, socket for UMS3 (USB-to-serial module). Built-in support for In-Circuit Serial Programming and monitoring (SIGMA).

DISCONTINUED! EduKit84 MU Beta controlled PIC16F84A educational board with programmer.

DISCONTINUED! EduKitBeta MU Beta controlled educational board. It comes equipped with four analog channels (A/D converter, analog comparator), two I2C devices (serial EEPROM and thermometer), serially controlled LED display, LED, two pushbuttons, RS232 converter (UART), buzzer (PWM).

DISCONTINUED! ProtoKit84 MU Beta controlled PIC16F84A prototype board with programmer.

USB Products

DISCONTINUED! UMP1 24-pin low cost USB->Parallel module based on the FT245BM chip. 8-bit parallel bus with the handshaking signals. Capable of communication speeds up to 1 MByte/sec.

DISCONTINUED! UMP2 28-pin low cost USB->Parallel module based on the FT245BL chip. 8-bit parallel bus with the handshaking signals. Capable of communication speeds up to 1 MByte/sec. On-board serial EEPROM.

DISCONTINUED! UMS1 24-pin low cost USB->Serial module based on the FT232BL chip. Capable of communication speeds up to 3 MBaud. UMS1 is directly supported by PVK40 - feature rich development board.

DISCONTINUED! UMS2 28-pin low cost USB->Serial module based on the FT232BL chip. Capable of communication speeds up to 1 MBaud in the RS232 mode and up to 3 MBaud in the RS485 mode. On-board serial EEPROM.

DISCONTINUED! UMS3 24-pin low cost USB->Serial module based on the FT232RL chip. Capable of communication speeds up to 3 MBaud. On-chip EEPROM and the unique serial number.

DISCONTINUED! Recommended replacement: UCAB232 UDS1 Development kit dedicated to experiments with the UMS3 USB->Serial module.

Ethernet Products

DISCONTINUED! SPINET For fast and easy implementation of 10 Mbps Ethernet to SPI interface.